An investigation on the properties of silicone oil using icp-oes/tga-dsc & ftir

Introduction:

A silicone oil is any liquid polymerized siloxane with organic side chains. The most important member is polydimethylsiloxane. These polymers are of commercial interest because of their relatively high thermal stability and their lubricating properties.

Polymer backbone of silicone oil consists of alternating silicon oxygen atoms. According to the chemical structure, the silicone oil series can be divided into methyl silicone oil, ethyl silicone oil, phenyl silicone oil, methyl hydrogen-containing silicone oil, methylphenyl silicone oil, methyl chlorophenyl silicone oil, methyl ethoxy silicone oil, methyl propyl silicone oil, methyl vinyl silicone oil, methyl hydroxyl silicone oil, ethyl hydrogen-containing silicone oil, hydroxyl hydrogen-containing silicone oil, cyanogen-containing silicone oil and so on. Silicone oil can be prepared by dimethyl cyclosiloxanes and hexamethyldisiloxane conducted telomerization under the presence of catalysts. Its viscosity was increased by the number of silicone chain sections in the molecule, from the easily flowing liquid to a thick semi-solid. It is generally colourless or pale yellow, odourless, non-toxic, non-volatile liquid. It has excellent heat resistance power, electrical insulation, weather resistance, hydrophobicity, physiologically inert & smaller surface tension.
Silicone oil is used as a long-term release agent in the contour machining of plastic and rubber as well as in food production. It is also used as high and low temperature lubricant between various materials, manufacturing the additives of lubricating plastics. glass, ceramics, metal, cement and other products which when treated with dimethylsilicone oil are not only hydrophobic, but also corrosion resistance, mildew proof, surface smooth. It is widely used as heat carrier and efficient defoamers in the chemical, pharmaceutical, cosmetics materials, food and other sectors, quakeproof damping material in precision machinery and instrumentation, high-temperature resistance dielectric liquid in the electric appliance and electronics industry. It also widely used as polishing agent of automotive, furniture, floor, as well as hydraulic oil of pumps, brakes , cylinders and so on.

Experimental & Results:

Silicon & other trace elements were quantatively estimated by Perkin Elmer optima 7000 DV ICP-OES. Thermogravimetry analysis was done using Perkin Elmer STA 6000 TG/DSC instrument. The samples were also studied by Thermo Scientific Nicolet IS10 Fourier Transmission Infra-red Spectrometry.Viscosity of the samples were measured using Red Wood Viscometer.
a) ICP-OES Analysis: The samples were acid digested using acid digestion vessel.Calibration curves were made using reagent blank & analysed standard of pure standard liquid CRM of required strength. The following figures show the calibration curves made for analyzing different element in ICP and their spectrum details. The table shows silicon and trace element concentration analysed in ICP for five different grades of silicone oil samples received at laboratory.

Investigation on transportable moisture limit (tml) of coal
NTPC – Sail, Bhilai appoints MSK on a 2 years contract for environmental monitoring

Leave a Reply

Your email address will not be published. Required fields are marked *

RECENT POSTS